Description And Function; Unpacking The Product; Place Of Installation; Transport - Juskys Rhodos 300832 Gebrauchs- Und Montageanleitung

CAUTION
Injuries and property damage.
Modification of the product may result in
personal injury and property damage and
will void the warranty.
►Only use the product with the original
parts supplied and in the original con-
dition.
►Only use spare parts approved by the
manufacturer.

2. Description and function

This product is ideal for the balcony and terrace.
The frame made of powder-coated steel and the
seat and backrest made of acacia wood in teak
look are weatherproof and durable. The product
is delivered pre-oiled. It also has a cream-colou-
red seat cushion. The Rhodos acacia wood table
is available to match.
3. Unpack and check

3.1 Unpacking the product

WARNING!
Risk of suffocation from packaging mate-
rial and from swallowing small parts.
►Dispose of the packaging material in
the household waste according to re-
gulations.
►Store the packaging and small parts re-
quired for repackaging away from mois-
ture and out of reach of children.
NOTICE
Material damage.
Pointed, sharp and scratching objects
can damage the product when opening
the packaging.
►Do not use any pointed, sharp or scrat-
ching objects to open the packaging.
1. Remove all parts from the box.
2. Lay the pieces side by side on a clear, soft,
and level surface.
3. Check the scope of delivery for completeness
and intactness, see chapter „13. Part list" on
page 23.
4. Mounting
NOTICE
Damage to the product due to incorrect
assembly.
►Assemble the product completely and
safely.
►Assemble the product with at least one
second person.
►Screw the screws hand-tight into the
connecting holes and only tighten the
screws in the last step to prevent the
parts from jamming.

4.1 Place of installation

1. Select a suitable installation location that
meets the following requirements:
• The installation location is dry and can be venti-
lated regularly.
• The installation site is not permanently exposed
to the sun and strong temperature fluctuations.
• The subsurface of the installation site is level and
non-slip.
2. Follow the assembly steps shown, observing
the safety instructions, see „14. Assembly" on
page 24.

5. Transport

CAUTION
Risk of injury and material damage due to in-
correct transport.
►Only transport the pieces of furniture
upright and individually.
6. Use
CAUTION
Risk of injury due to improper use.
►Use the product in accordance with its in-
tended use, see chapter „1.2 Use as inten-
ded" on page 8.
►Do not overload the product set.
►Before use, make sure that the product
has been fully constructed. All legs must
be securely placed on the ground.
►Make sure that during use no small chil-
dren or animals are under the product.
EN
9