Button Functions; Additional Notes; Battery Maintenance; Operating Conditions - Insize 1130 Bedienungsanleitung

BUTTON FUNCTIONS

» mm/in: Switch between millimeters and inches
» ON/OFF: Turn the caliper on or off
» 0: Set the measurement to zero
PREPARATION BEFORE USE
» Clean the measuring faces with a soft cloth.
» Close the external measuring jaws and press the 0 button to set zero.
» Regularly check the zero-setting for accuracy.
PROPER USE GUIDELINES
» Use constant and proper force during measurement to ensure accuracy.
» The jaws should "hold" the workpiece lightly and still be able to slide on it.

ADDITIONAL NOTES

» The caliper will automatically power off after about 20 minutes. Press any button or move the unit to wake the
display.
» Optional accessory: Data Output Cable (Codes: 7315-22, 7302-22).

BATTERY MAINTENANCE

» A single battery can last up to 1 year under normal use.
» If the digits flash, the battery is running low. Replace it promptly.
» If the caliper will not be used for an extended period, remove the battery to prevent leakage and potential
damage.

OPERATING CONDITIONS

» Temperature Range: 0 - 40 °C (32 - 104 °F)
» Relative Humidity: Should not exceed 80 % RH
www.insize.cz www.insize.sk www.insize.hu www.insize.at