Trust START-LINE ATMT-502 Bedienungsanleitung Seite 4

BATTERIES
Remove the batteries if the product
for an extended period. extreme
the capacity and lifetime of the battery.
Replace the 12 Volt A23 alkaline
transmit indicator no longer lights when sending
ON or OFF signal. Replace the 3 Volt CR2032 lithium
battery when the low-battery
the screen. Replacing the CR2032 battery
the memory of ATMT-502.
Do not crush, burn or shred batteries. Dispose of
batteries according to local regulations.
when possible. Do not dispose as household
LIFE-SUPPORT
Never use Trust SmartHome products for life-support
systems or other applications in which equipment
malfunctions can have life-threatening consequences.
INTERFERENCE
All wireless devices may be subject to interference,
which could affect performance.
The minimum distance between
should be at least 50 cm.
LEGAL INFORMATION
CE:Trust declares this device complies
WEEE:Dispose of the device at a recycling centre. More information: www.trust.com
Warranty information: www.trust.com/warranty
will not be used
temperatures reduce
battery when the
an
indicator appears on
will erase
Please recycle
waste.
2 receivers
with the Directives
ATMT-502 TIMER REMOTE
REPAIRING
Do not attempt to repair this product.
There are no user-serviceable
WATER-RESISTANCE
This product is not water-resistant.
Moisture will corrode the inner
CLEANING
use a dry cloth to clean this product.
chemicals, cleaning solvents,
HANDLING
Do not drop, knock, or shake the device.
Rough handling can break internal
and fine mechanics.
ENVIRONMENT
Do not expose the product to excessive heat or cold,
as it can damage or shorten the life of electronic Circuit
boards and batteries.
as listed in Section 2 of this document,
CONTROL
parts inside.
Keep it dry.
electronics.
Do not use harsh
or strong detergents.
circuit boards
2