Zeon CE4555-DCF Gebrauchsanweisung/Garantie

English
CE4555-DCF
DCF Radio Control Digital Alarm Clock
Instructions / Guarantee
1. Snooze / Light Button
2. LCD Display
3. Setting Button
4. Alarm Button
5. +/ Radio Control Button
6. - Button
7. Battery Compartment
A. Time
B. AM/PM Indicator
(For 12 Hour Format)
C. Alarm Time
D. Alarm Icon
E. DST Indicator
A
C
D
E
1
2
3 4
B
7
5 6
Battery precautions
1. Do not use rechargeable batteries.
2. Use only alkaline AAA batteries of the same or equivalent
type.
3. Insert batteries with the correct polarity.
4. Keep batteries away from children.
5. Dispose of exhausted batteries according to local legal
requirements. Do not dispose them by throwing away with
normal household rubbish.
6. Avoid short circuiting the contacts in the battery compart-
ment and battery terminals.
7. Remove batteries from the unit if it will not be used for a long
period of time.
8. Exhausted batteries should be removed from the battery
compartment to prevent over-discharge, which can cause
leakage and may cause damage to the clock.
Getting started
1. Remove the battery door.
2. Insert 2xAAA size new battery as indicated in the battery
compartment.
3. The Clock will automatically start scanning for the radio-con-
trolled time signal.
4. Close the battery door.
Radio controlled operation DCF version (Germany &
European countries – Central European Time zone)
This digital alarm clock is set and controlled automatically by
DCF radio signal. The DCF radio time code signal is broadcast
from Frankfurt, Germany. The coverage of the DCF signal is the
whole of Germany. The time code signal can be received up to
1500km from Frankfurt. This covers most of Central and Western
Europe.
Important
For best reception performance, please read the following
instructions.
1. We strongly recommend you start your clock at night. Allow
the clock to receive the signal automatically overnight.
2. Place the unit away from interfering sources such as TV set,
computers, microwaves, etc.
3. Avoid placing the unit on or next to metal surfaces.
4. Avoid closed areas such as airports, basements, cement
office buildings or factories.
Note: Exposure to an electrostatic environment may cause the
clock to reset. In this event, please follow the instructions as
described in this manual to set the clock again.