Puffco PEAK PRO 3DXL Bedienungsanleitung Seite 9

Cleaning
3DXL Chamber
Glass
X
07
Remove the XL Joystick with Jacket &
Tether, then unscrew the 3DXL Chamber
from base.
Use a cotton swab to gently remove any
residue with 90%+ isopropyl alcohol.
Submerge the chamber in 90%+ isopropyl
alcohol for 20 minutes. Air-dry completely
before reattaching.
DO NOT rinse with water.
Allow chamber to cool completely
before handling.
Isopropyl alcohol is highly flammable;
allow chamber to air-dry completely
before reattaching.
Carefully remove glass from base.
Once removed, submerge glass in 90%+
isopropyl alcohol for 20 minutes.
After soaking, thoroughly rinse glass
with water and let air-dry completely
before reattaching to base.
X Avoid allowing water into lower section.