MALTEC MASTERCOLD Bedienungsanleitung Seite 15

！
Ventilation grilles that cover or block refrigerators are not allowed and
◦
must be kept away from curtains and other flammable materials. Avoid
direct exposure to heat or sunlight.
Warning: When placing equipment, make sure the power cord is not clamped
or damaged. Do not place multiple portable sockets or portable power sources
at the back of the device.
Appliance Connectors
In general, two kinds of power supply can be used to supply power to the
electronic refrigerator (products of some specifications may be different, please
refer to the nameplate of the product for specific power supply specifications).
AC power
Usage
Preparation before use
 Remove all packaging components, including foam pads at the bottom of
the refrigerator and foam pads and tape (if any) used to hold the
accessories in the box.
 Check random attachments and data.
 Put the refrigerator in its proper position with reference to handling and
placement.
 Follow the cleaning instructions to clean the inside and outside of the
refrigerator.
Power on and function Settings
－ COLD The cooling function is switched on – the green indicator light is on.
OFF The appliance is switched off. HOT The heating function is switched
on – the red indicator light is on. Power mode selector switch ECO The appliance
is in power-saving mode (can only be selected in 220-240 V mode).
Recommended if the cool-box is only partly
switched off. MAX Appliance operating at maximum power.
The 'cooling' function is indicated by the green light. The red indicator light
shows that the 'keepwarm' function is enabled.
lled. OFF The appliance is

15/ 29
DC power