Herunterladen Diese Seite drucken
Verfügbare Sprachen

Verfügbare Sprachen

EN
Installation
1
Place two units next to each other's
frames. Hold the drill holes of the
hinge level. Insert one of the anchor-
ing hooks through the holes.
3
In the end, insert the door unit.
Intended use
This equipment is for guarding puppies. It is designed to be used this way and may only
be used in this manner.
Do not use this equipment as a playpen for children.
Little children may not be requested to install the puppy kennel. They must not operate
the bolt by themselves. There is a risk of entrapping fingers or the hand.
The puppy kennel is not suitable as a kennel for big dogs.
ORIGINAL INSTRUCTION MANUAL
RETAIN FOR FUTURE REFERENCE
Security Instructions
2
Combine the other units in the
same manner.
4
Lock the swing door by gripping
the handle of the bar and pushing
it into the latch.
402501
loading

Inhaltszusammenfassung für TecTake 402501

  • Seite 2 402501 ÜBERSETZUNG DER ORIGINALBETRIEBSANLEITUNG FÜR KÜNFTIGE VERWENDUNG AUFBEWAHREN Montage Stellen Sie zwei Elemente an den Rah- men zusammen. Halten Sie die Boh- rungen der Scharniere bündig überei- Verbinden Sie auf diese Weise nander. Stecken Sie einen Ankerhaken auch die anderen Elemente.