Off
•
Turn off the unit when changing or cleaning attachments. (Fig. A).
•
Remove the rotating head by lifting it up from the shaver. (fig. B)
•
To reassemble the rotating head, place it in an accurate position on the shaver and
press it down until it locks into place. The rotating head release button should be in the
same direction as the front of the shaver.
•
Press the rotating head release button to open the shaver head. (Fig. C)
•
Pull the shaving unit off the rotating head (fig. D).
•
Clean the beard residue located on the inside of the rotating head and shaving unit.
(fig. D)
•
For thorough cleaning, turn the latch counterclockwise to remove the attachment frame
(fig. E), then remove the shaving blades and nets in turn from the shaving unit. (fig. FJ
•
Brush off the beard residue thoroughly with the brush and rinse under water. weekly
use (fig. G).
•
Place the shaving nets, blades and shaving frames back into the shaving unit in turn
(fig. H). Make sure the holding frame is locked, otherwise the shaving head cannot be
closed smoothly.
•
Mount the shaving unit back on the base of the rotating head; and mount the rotating
head back to the shaver. (Fig. IQ.
•
Refer to (fig. A) to remove the rotary shaver head; mount the trimmer head with the
blade facing the back of the shaver and
•
push the trimmer head down until it locks into place. (Fig. J)
•
Clean the trimmer with the brush or by rinsing it under running water. (Fig. K}
•
Clean the trimmer under running water and let it dry before using it again (fig. L).
WARNING
•
The device must be cleaned regularly so that you can continue to enjoy its top
performance and optimal results.
•
You should always turn off the shaver before cleaning it.
•
Ensure that no water gets into the shaver or charger to avoid the risk of electric shock
when it is put back into use.
•
This product is IPX6 rated so it can be cleaned under running water. Do not completely
submerge the unit in water.
•
Disconnect the USB power cable (adapter) before using a device for an extended period
of time, store it carefully.
•
Make sure it is unplugged and completely dry.
•
Store the device in a cool, dry place.
•
Keep device out of the reach of children.
STORAGE
•
use a device for an extended period of time, store it carefully. - Make sure it is
unplugged and completely dry.
•
Store the appliance in a cool, dry place.
•
ENVIRONMENTS. device is kept out of the reach of children.
•
This device contains a built-in rechargeable battery. The battery must be removed from
the device before disposing of it.
•
Never replace the battery with other types of batteries, especially non-rechargeable
ones. This may cause fire or electric shock.
•
Never dispose of batteries in the regular garbage; make sure to dispose of batteries at
an official recycling center or a collection point.