Trevi SLD 3P60 Kurzanleitung

1
FUNCTIONS
 Time (12/24h, default 24h format)
FUNCTIONS
 Month, Date, weekday display ;
Time (12/24h, default 24h format)
 Weekday display in 7 languages: ENG, ITA, FRE, DUT, SPA, DAN, GER

Alarm and Snooze (5min);

Month, Date, weekday display ;

°C/°F
 Temperature in ;
Weekday display in 7 languages: ENG, ITA, FRE, DUT, SPA, DAN, GER

White LED backlight;

Power supply: 2pcs AA batteries (exclude)

Alarm and Snooze (5min);

°C/°F
Temperature in ;

TIME SETTING
Hold SET key for 2 seconds to enter into time setting mode, setting sequence: 12/24h format -> hour -> minute ->
White LED backlight; 

year -> month -> date -> weekday language -> quit.
Power supply: 2pcs AA batteries (exclude)
 During setting procedure, press UP key once and ahead; hold UP key, go ahead more quickly.

During setting procedure, press DOWN key once and back; hold DOWN key, go back more quickly.

The clock will exit the setting if without any operation in 30S.

TIME SETTING
In 12h format, AM will show on the display in the morning and PM will show on the display in the afternoon.

Hold SET key for 2 seconds to enter into time setting mode, setting sequence: 12/24h format -> hour -> minute ->

A
ALARM & SNOOZE SETTING
year -> month -> date -> weekday language -> quit.
Press ALARM key to turn on/off the alarm. If alarm is on, the bell icon

B
During setting procedure, press UP key once and ahead; hold UP key, go ahead more quickly.

 Hold ALARM key for 2 seconds to enter into alarm time setting mode, setting sequence: alarm hour -> alarm
minute -> quit
During setting procedure, press DOWN key once and back; hold DOWN key, go back more quickly.

During setting procedure, press UP key once and ahead; hold UP key, go ahead more quickly.

The clock will exit the setting if without any operation in 30S.

During setting procedure, press DOWN key once and back; hold DOWN key, go back more quickly.

D
will flick. Buzzer alarm in 2 minutes, alarm will change as below:
 When alarming, the alarm icon
In 12h format, AM will show on the display in the morning and PM will show on the display in the afternoon.

a. 0-10 second: 1BI sound/sec
b. 10-20 second: 2BI sound/sec
E
ALARM & SNOOZE SETTING
c. 20-30 second: 4BI sound/sec
F
d. after 30 second: continue BI sound
Press ALARM key to turn on/off the alarm. If alarm is on, the bell icon

It will stop alarming automatically if without any operation after 2 minutes. And it will repeat the process at same
time on the next day.
Hold ALARM key for 2 seconds to enter into alarm time setting mode, setting sequence: alarm hour -> alarm

FUNCTIONS
minute -> quit
During setting procedure, press UP key once and ahead; hold UP key, go ahead more quickly. Time (12/24h, default 24h format)
 
During setting procedure, press DOWN key once and back; hold DOWN key, go back more quickly.

Month, Date, weekday display ;

When alarming, the alarm icon will flick. Buzzer alarm in 2 minutes, alarm will change as below:

Weekday display in 7 languages: ENG, ITA, FRE, DUT, SPA, DAN, GER

a. 0-10 second: 1BI sound/sec
7
2 3 4 5 6
ET801A manual
ET801A manual
ET801A manual
will show on the display.
will show on the display.
BEFEHLSBESCHREIBUNG
1. Anzeige
2. SET-Taste, Datum/Uhrzeit einstellen
3. ALARM-Taste, Alarm aktivieren/deakti-
vieren/einstellen
4. WAVE-Taste, Temperatureinstellung in
8
Grad Celsius oder Fahrenheit
BESCHREIBUNG DER ANZEIGE
A. AM/PM-Symbol
B. Aktives Alarmsymbol
G. Temperatur
EINSETZEN DER BATTERIEN
1. Entfernen Sie die Batteriefach-Abdeckung (8).
2. Legen Sie zwei 1,5-V-AA-Batterien ein und beachten Sie dabei die im Batteriefach
angegebene Polarität.
3. Schließen Sie den Deckel auf das Batteriefach.
UHR- UND DATUMSEINSTELLUNG
1. Drücken und halten Sie die SET-Taste (2).
2. Drücken Sie die Taste DOWN (5) oder UP (6), um den 12-Stunden-/24-Stunden-Modus
C
auszuwählen (Zeitformat wird angezeigt). Drücken Sie die SET-Taste (2).
3. Drücken Sie die Taste DOWN (5) oder UP (6), um die Stunde einzustellen. Drücken
Sie die SET-Taste (2).
G
4. Drücken Sie die Taste DOWN (5) oder UP (6), um die Minuten einzustellen. Drücken
Sie die SET-Taste (2).
SLD 3P60
6. UP-Taste, Einstellungsanpassung oben
7. SNOOZE/LIGHT-Taste, vorübergehende
Unterbrechung der Alarm-/Display-
beleuchtung
8. Batteriefach
C. Aktuelle Uhrzeit
D. SNOOZE-Funktionssymbol aktiv
E. Aktuelles Datum
F. Wochentag