x-sense SWS51 Bedienungsanleitung Seite 4

To download the X-Sense Home Security app, scan the QRcode
below or searchfor "X-Sense Home Security" in the Apple App Store
or Goog e Play Store.Sign up with a valid email address. f you already
have an account, make sure the app is updated to the latest version.
Connecting the Water Leak Sensor to the Base Station
The water leak sensor connects to the basestation through the
wireless network. When the sensor is connected
you can receive push notifications wherever you are to stay informed
of the device status,and to silence an alarm from your smartphone.
Note: Before adding devices to the system, make sure the base
station has been successfully added to the app.
1 Tap" O" and select"WaterLeakSensors" i nthe product list.Then,tap
"Next"to enterthe pairingpage.
2 FoIow the prompts on the page by pressingthe Test/SiIence/Pair b utton
twice on the bottom of the water leaksensoruntil it flashesblue rapidly,
indicatingthat the deviceis waiting to connect to the Wi-Fi.
3.Tap "Next"to add the device.You will hear"Readytoadd the device."
4 After successfuy connected, you wi hear"DeviceAdded"and the
"DeviceAdded" pagewill appear.Thenyou canfind the water leak
sensor in the device list.
5. f you want to add mu tip e devices into the system, please repeat
the above steps.
to the base station,
04
NOTE:If you fail to add the water leak sensor to the network within
60 seconds, the device will automatically exit the network
configuration. TOre-enter the network configuration, you need to
repeat the above Steps.
Testing the Device
When the water leak sensor is successfuly added to the basestation,
you must test the device to ensure it is operating normal y. Pressthe
Test button at the bottom of the device, or you can open your
smartphone app and go to the "Device Settings" of the water leak
sensor.Then tap "DeviceTest" to test the device.The alarm will deliver
3 beeps paired with the LEDflashing red.The sound will automatically
stop after the test is comp eted, You will receive a push notification on
your smartphone, indicating that the device is functioning properly.
Press
os