Puffco PROXY Bedienungsanleitung Seite 8

Cleaning
Chamber
Base
06
Remove the Joystick with Jacket & Tether,
then unscrew the 3D Chamber from base.
Use a cotton swab to gently remove any
residue with 90%+ isopropyl alcohol.
Submerge the chamber in 90%+ isopropyl
alcohol for 20 minutes. Air-dry completely
before reattaching.
Do not rinse with water.
Allow chamber to cool completely before handling.
Isopropyl alcohol is highly flammable; allow
chamber to air-dry completely before reattaching.
Remove glass and chamber from base.
Use a cotton swab soaked in 90%+
isopropyl alcohol to gently clean the gold
contact points and air path.
Allow to air-dry completely before
reattaching components.
DO NOT rinse or submerge in liquid.