ZTE WATCH live2 Benutzerhandbuch Seite 3

Enter pairing mode
The watch automatically turns on while charging.
Press and hold the button on the side to power on.
Get the "Z Sports" app
Please download and install the "Z Sports" APP to
bind your device and use more services.
Set up and pair
Please download and install the "Z Sports" APP to bind
your device and use more services.
Please scan the QR code on the right or the QR code
on the watch screen.
Download and install the "Z Sports" APP.
Open the "Z Sports" APP and follow the instructions on
the screen.
When adding a device, a pop-up box about whether to
accept the binding will pop up on the watch side, click
"√" to complete the binding with the APP.
During the binding process, please make sure that the phone's Bluetooth is
turned on to ensure that the watch and the phone are connected normally.
If during the process of adding a device, multiple same products around are
displayed, please click "Scan to Pair" to scan the QR code on the watch screen
to bind.
If the device cannot be found during the process of binding the device, or the
device cannot be connected during use, please try to select "Restore Factory" in
the watch system operation interface, and then re-bind the device.
1
Button actions
4
Short press
Wake the watch screen
Return to the home screen
Lock screen
Pause or resume workout
On home screen
5
Press and hold to change the watch face
Swipe down to enter shortcut menu
Swipe up to enter app list
Swipe left to see Switch card
Swipe right to see Switch card
Charger
6
Please connect charging cable to the
watch as follows
Use a regular USB charger with output
voltage of 5.0V and output current of 200mA
or above to connect your charging cable to a
power outlet or charging device
Press and hold
Power on, off or restart
Press for 10 seconds to
force restart
The charger
2