VEVOR MINIB Bedienungsanleitung Seite 9

for a few more seconds.
F. Peel to finish: Peel off transfer paper or HTV ( Please check the transfers are
warm peel or cold peel, and peel off accordingly ).
Note
Please switch off the machine and unplug the power cord when the machine is
not in use. It may be easy, but it's also HOT. Handle with care.
▶ TROUBLESHOOTING
Q: Why does the temperature not reach the set value and when I press the
Timer button, the machine begins to countdown. Is there something wrong?
A: Please don't worry, it is normal, after the temp reach your desired value (not
setting value). you can press the Timer. Make sure that your temp reach the
recommended settings.
Q: What are the tips for successful transfers with VEVOR Press? A: For perfect
transfers that last, three things are important:
1. A firm, even surface Iron boards and plastic tables can not provide a firm,
even surface needed for successful transfers. We suggest you can use our
silicone mat.
2. Use the recommended settings for the iron-on and base material you're
using.
3. Make sure you apply firm pressure when transferring.
Q: How hard do I have to press?
A: Some applications call for "gentle" pressure, and some call for "firm"
pressure. Firm pressure means pressing down with two hands and 15-40 lbs of
body weight. Gentle pressure means one hand with 5-15 lbs of body weight. In
all cases, a waist-high table is recommended for ease in applying the
recommended pressure.
Q: When pressed onto the garments, the color of the design is faded?
A: Reason comes from three aspects, the pressure is too low, the temperature
is not hot enough or the design has not been pressed for enough time. You may
need to try more to get right temp, time and pressure.
Q: I followed the instructions and my iron-on didn't stick. What happened? How
do I get it to work?
A: The most common reasons for your images not sticking:
- 8 -