Placing The Antenna Dish - Travel Vision R6 Benutzerhandbuch

3.3

Placing the antenna dish

How to mount the antenna dish on the tripod: How to mount the antenna dish on the tripod:
Guide the rotation axle of the antenna dish in of the antenna dish into the plastic
socket of the tripod
Then slowly rotate the dish in either direction until the axle Then slowly rotate the dish in either direction until the axle
has been fixed in the tripod.
Lower the LNB arm all the way down. And tighten the Lower the LNB arm all the way down. And tighten the
screw
Before using the system, connect the cable with the F- Before using the system, connect the cable with the F
connector to the LNB and hand-tighten it
required.
tighten it. No tools are
page 7