Turtle Beach VICTRIX PRO KO Kurzanleitung Seite 7

C. Place the Switch Puller around the aluminum Button Plug you wish to remove, and firmly
pull up.
D. Locate the additional Switch from the storage area and take note of the pin placement
on the bottom of the Switch to carefully align the pins when inserting into the Pro KO.
E. Locate the Button Cap from the storage area, align and press it onto the Switch.
F. Locate the Light Ring from the storage area, place it over the Button Cap, align the feet
and firmly press into place.
AUDIO CONTROLS
A. Plug a headset into the 3.5mm Headset Jack on the left side of the Pro KO
B. Hold the Audio Button and push the UP or DOWN Direction Buttons to adjust the volume
Up or Down.