Pre-Assembly Checklist - Rockford Rf1827005 Montageanleitung

Product Assembly Guidelines:
- We advise you to read the instructions very carefully before proceeding to assemble the Pergola.
- Carefully select the location, avoiding rainy days, prevailing winds, and overhanging trees. We recommend you also
check the surrounding area for any possible obstructions which may be near or within the product placement.
- Mount the pergola on a flat and level foundation, preferably on concrete slab or concrete supports on each post.
- Ensure at least 2/3 individuals are present during assembly.
- Carefully remove the protective film (approximately 1 hour required in total).
- Keep children away from the assembly area.
- Exercise caution to avoid the risk of pinching.
- Do not tighten screws fully until the entire product is assembled.
- Follow all assembly steps meticulously and verify the structure's level on all sides.
- Do not anchor the pergola before completing the entire assembly process, we recommend you re-check tightness
of all fasteners and the level of the complete pergola including the posts.
- Properly anchor the pergola to the ground using expansion screws.
- To avoid any damages and injuries, please do not climb on the roof or the structure of the pergola.
- Please ensure that you retain the instruction manual and do not throw it away after assembly.
- The user is liable for any damages or injuries caused due to incorrect or improper installation.

Pre-Assembly Checklist:

Before starting the assembly, please ensure:
- All listed parts are supplied and undamaged.
- Report any missing and/or damaged parts within 14 days of delivery AND before assembly!
Do not install defective or damaged parts. Doing so may invalidate your claim and/or warranty!
- For reporting missing parts, please contact your point of sale (store or website) where your product was purchased.
- Do not discard the packaging without confirming the proper functioning of the product.
(There is a production tracking number on the inside of every box as well as a batch number on the label, please note
the number together with the batch number on the first page of your instruction manual.)