Ruijie Reyee RG-EW1200G PRO Installationsanleitung Seite 6

Indicator Instruction
Indicator
System Status Indicator
Port Indicator
FAQ
Why can't I visit
1) Check whether NIC is configured as DHCP.
2) Ensure the computer is connected to any of the LAN ports and the
indicator is on; otherwise
again.
3) Re-open the browser (recommend to use Google Chrome) and
visit 192.168.110.1
4) Change the browser.
5) Change the cable or computer.
If all these methods fail, please restore the factory settings (hold the
Reset Button for IOS).
Why can't I access
1) Check whether the cable is connected as the instruction, and the
indicator is on.
2) Check the Internet connection type.
a. If your ISP offers an account/password,
enter your account/password.
b. If your ISP offers the static IP address, subnet mask, gateway
DNS, please select Static IP and enter the information.
3) If you still can not access the Internet, please contact your ISP.
Note:
This equipment
Hong Kong.
Status
Off
Stead On
Fast Blinking
Slow Blinking
Off
Stead On
Blinkin
192.168.110.1?
you may change the cable and have a try
again.
the Internet
is restricted to indoor operation
Description
The router is
The router is runnin
Restoring factory
settin s/Rebootin
Reyee Mesh is being paired or
re eater sto
The port is not connected
cable disconnects
The ort is connected
Data is bein
after configuration?
please select PPPoE and
in 5.15-5.35GHz
4
owered off
normall
s
or the
normall
transmittin
and
for