Ruijie Reyee RG-EW1200G PRO Installationsanleitung Seite 5

settings. If they are configured
first (see the FAQ for how to restore the factory settings). Do not
connect the network
Power on the routers within 2 meters
indicators will start to blink quickly. Wait for a period of time, the
system indicators
on. Press the Pairing button on the main router, and its system
indicator will start
neighboring secondary
the system indicator changes to steady on. When the system
indicators on the secondary
are being paired; when the system indicator changes to steady on,
the pairing completes.
3. Move the paired
the signal needs to be expanded,
configuration is required.
After the router is powered on, the system indicator blinks, which
means it is connecting
turns to steady on, the connection
WiFi network can
Press for pairing
@
Broadband
Main
Ensure the router
After pressing the button, the system indicator starts blinking.
As the detection ends after 2 minutes, it will stop blinking.
before, restore the factory settings
cable to the
will turn to steady on, which means the routers are
to blink. The main
routers for 2 minutes. After the search is over,
routers blink, it means that two routers
Reyee Mesh routers
to the main router. When the system indicator
be constructed.
ooo
Router
can access the Internet
routers.
of the main router, and their
router will search
to the positions
and power them on. No more
is successful, and a distributed
@ ecoc
Secondary
Do not connect
During pairing, the system indicator
blinks.
If pairing succeeds, it will stop blinking.
3
for
where
Router
with network cable