Turtle Beach VICTRIX PRO KO Bedienungsanleitung Seite 6

G. Remove the aluminum Button Plug from the storage area and snap it into place of the Switch that was
just removed
H. Place the Button Cap upside down in the storage area to secure it
I. Place the Light Ring feet into the holes around the upside-down Button Cap to secure in place.
ADDING BUTTONS
A. Remove Top Cover
B. Locate and remove the Switch Puller Tool from its storage location
C. Place the Switch Puller around the aluminum Button Plug you wish to remove, and firmly pull up.
D. Locate the additional Switch from the storage area and take note of the pin placement on the bottom
of the Switch to carefully align the pins when inserting into the Pro KO.