TecTake 405315 Bedienungsanleitung Seite 5

Carry Cot Installation
The carry cot comes pre-assembled. Plug it on to the adapters as shown in Fig 5a and 5b.
Seat Adjustment
The position of the seat can be adjusted with the help of buttons present on the stroller.
Buckle the belt at the back, as shown in Fig. 6a.
Buckle the belt on both sides of the carry cot as shown in Fig. 6b.
Press the side buttons and adjust the carry cot as shown in Fig. 6c.
Seat Reversal
To reverse the seat, just disconnect the carry cot from the frame by pressing down the
two side buttons, change its direction and fix it onto the connectors again as shown in
Fig. 7a, 7b, 7c and 7d.
Button
Belt
5
Button
Belt