AXPOL V1385-15 Benutzerhandbuch

USER MANUAL (ENG)
Wiereless earphones with induction chargeable box
Model no.:V1385-15; lot no.: ZZ-249/23/IMP
Technical details:
Bluetooth connection name:V1385
Bluetooth Version: 5.3
BT Distance: up to 10m (signal power 2,5 mW)
Impedance: 32Ω
Frequency Range: 20Hz-20kHz
Driver dimension:10mm
Battery Capacity earphone: 50 mAh Li-polymer
Battery Capacity charging case 400 mAh Li-polymer
Input port: Type C
Input voltage, current: 5V/0.3A
Charging time of earphone/ charging box: around 1,5h
Playing time: around 5 hours
Max distance between earbuds: 20m
Product introduction:
1. Earbuds
2. Speaker
3. Dual Microphone
4. Charging level Indicator of Charging case
5. Charging Case
6. Multifunction sensor button
Operation Instruction
Using of the earphones
Take the earphone out of the charging case,it will automatically turn on and pair, device
search: V1385 click connect, the earphone can be used normally after the connection is successful, the earphone
will automatically shut down and charge automatically when placed in the charging box.
Use of the charging box
Connect the power supply and insert the Type-c cable, it will charge the charging box.
The battery level is displayed with the help of indicator lights. When it is fully charged you will see that all four indicator lights are
solid white. The charging time of the charging box is about 1.5 hour, do not overcharge. In case you do not use the earphones
for a long time, charge the earphones at least once every 3 months. Please put earbuds into charging case in proper location and
press them well for charging.
Pairing
The right (R) and left (L) earbuds can work together(Stereo mode). Any earbud can work as an independent earphone(Mono
mode). The earbuds would enter pairing mode automatically after taking out from charging case. Open your phone's Bluetooth
connections manager, find "V1385" in the list of detected Bluetooth-devices and click it to connect. V1385 will remember last
paired device and attempt to connect with it automatically after next power on. It takes about 30 seconds to pairing successfully
for the first time pairing.
If pairing device is switched off or Bluetooth is disabled for 3 minutes, the earphones will turn off automatically.
Maximum operation range for the earphones is 10 meters. If you move out of the range, you will lose the connection. To restore
the connection you have to move back to operation range and reconnect the device.
LED indicator
LED indicator helps to understand what is going on with the earbuds.
The indicator on charging box is solid white - charging box is fully charged
The indicator on charging box is blink white - charging box is charging
The indicator on the earbuds is solid white - the earbuds are being charged
The indicator on the earbuds is off - hhe earbuds are fully charged
Operation Instructions
Power on - Take the earbuds out of the charging case or long press multifunction button for 5 seconds
until earbuds indicator lights flash white and you hear a voice prompt "Power on".
Power off- Put the earbuds into the charging case or long press multifunction for 5 seconds until
you hear a voice prompt "Power off". If you put only one earbud into the case, the other earbud will continue working.
Packaging Content:
1.Earbuds — 2 pcs.
2.USB Type-C charging cable — 1 pc.
3.Charging case — 1 pc.
4.Ear�ps — 6 pcs.
5.User manual — 1 pc.