Modecom freetab 1002 IPS x4 Schnellstartanleitung Seite 26

MODECOM FREETAS
3. Using a memory card
3.1 Insert the micro SD memory card to the device
* The device supports micro SD cards in standard SD / SDHC
+ To insert the card, set the connector tab toward the front of the
unit (printed toward the back of the unit)
+ To remove the card, press the edge of the card to release the card
to release the safety and pull the card out of the slot
Warning: When you load a file with the micro SD card, it can not be
removed from the slot and can cause a malfunction
4. Pairing Tablet with the Bluetooth Keyboard
To pair your tablet with a Bluetooth Keyboard, turn on Bluetooth
module in your tablet, then tum on the keyboard by holding "OFFI
ON" button for two seconds (LED status indicates by flash that the
tablet is on)
The next step is to press "Connect" button on the keyboard (LED
status indicates communication mode activation flashing constantly)
In the tablet click "Search for devices" (button is located in Blue-
tooth bookmark which is in the upper right comer), the keyboard is
going to be found automatically. Please click found device, one-time
access code will appear (4 digits), the code must be entered, confirm
by pressing "Enter", the device will be connected.
5. Technical Specifications
Quad Gore AW A315, ARM Cortex-AT 4 x Core 1.0
GHz; GPU: PowerVR SGX 544 MP2 8 x Core
Operating system | Android 4.2
Memory RAM 1GB DDR3
Memory Flash 8GB Flash MLC
Procesor
www.modecom.eu