Reboots ONE Bedienungsanleitung Seite 45

IMPORTANT INFORMATION REGARDING ELECTROMAGNETIC
COMPATIBILITY (EMC)
1) This product needs special precautions regarding EMC and needs to be installed and put into service
according to the EMC information provided, and this unit can be affected by portable and mobile RF
communications equipment.
1) * Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may
result in incorrect operation of the unit.
1) Caution: This unit has been thoroughly tested and inspected to assure proper performance and
operation!
1) * Caution: this machine should not be used adjacent to or stacked with other equipment and that if
adjacent or stacked use is necessary, this machine should be observed to verify normal operation in the
configuration in which it will be used
45
G uidance and manufacturer's declaration - electromagnetic emission
The device is intended for use in the electromagnetic environment specified below. The customer
of the user of the device should assure that it is used in such an environment.
Emission test
RF emissions CISPR 11
RF emission CISPR 11
Harmonie emissions
IEC 61000-3-2
Voltage fluctuations / flicker emissions
IEC 61000-3-3
Complia Electromagnetic environment
nce
- guidance
Group 1 The device uses RF energy only for its
internal function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
Class B The device is suitable for use in all
establishments, including domestic
Class A
establishments and those directly
connected to
the public low-voltage power supply
Complies
network that supplies buildings used
for domestic purposes.