Aqara Hub Schnellstartanleitung Seite 3

@ Please open the Aqara Home app, go to "Accessories" page and tap
"+" in the top right corner, and then select "Aqara Hub". Follow on-screen
instructions to scan or manually enter the HorneKit code on the Hub or its
packaging, and add the Hub to a Home Or Room.
HomeKit code for future use.
If the connection fails, press the button on the Hub for 10 seconds until
a yellow light blinks quickly to reconnect the Hub.
3. Add bridge accessories
After the Hub is connected, please open the Aqara Home app, go to
"Accessories" page and tap "+" in the top right corner, and select the
accessory to add to the Hub according
bridge accessory quick start guide for more details.
Installation
Please do not place the Hub too close to the router. For an ideal
transmission, a distance of 2 to 6 meters
2 Depending on the local environment,
reaches up to 30 meters between the Hub and bridge
without barriers, such as walls.
Please keep the
to instructions. Please refer to
is recommended.
the indoor transmission distance
accessories
Indicator Light Description
Indicator
Indicator
light color
Quick blink
It appears when vou connect
Yellow light
for thc first time or
you reset the Hub
It appears when Wi-Fi is connecting,
the network is disconnected
Blue light
Hub reconnects after the plug
is re-plugged
Purple light
Notice
1_Controlling this HorneKit-enabled accessory automatically and away
from home requires an Apple TV with tvOS 10.2 or later or an iPad with
iOS 10.3 or later set up as a home hub.
2. Communication between iPhone,
HomeKit-enabled Aqara Hub is secured by HomeKit technology
3. Communication between Aqara Hub and the following accessories
secured by Zigbee protocol which is customized
The accessories are as follows, Wireless
Switch (Single Rocker), Wireless Remote Switch (Double Rocker), Wall
light status
Slow blink
the Hub
Firmware updating
when
or the
N/A
Allow to add bridge
accessories
iPad, or iPod touch and the
is
and encrypted by Aqara
Mini Switch, Wireless Remote