MonsterShop S-RAX HD Bedienungsanleitung Seite 4

USER GUIDE
ASSEMBLY INSTRUCTIONS
1. Group parts together and lay them on the floor.
2. Attach 4 moulded feet to the end of 4 L-shaped upright beams.
3. Before assembling, ensure you are assembling the beams the correct way up: the
bigger part of the Q shaped holes need to be on top.
4. Take two of the L-shaped upright beams and attach a short beam across the bottom to
connect the two, creating a U-shape.
5. Push the beams into the bar locking system, remember to have them the right way up
and then hammer into place.
6. Repeat this process on the other two upright beams.
7. Connect the two U-shapes together using 2 long beams.
8. Slot one chipboard sheets into this metal shelf, securing with a tap of the mallet. Your
lower shelf is now complete.
9. Repeat this process either side of the rack, first with two small beams for the sides, then
with two long beams for the front and back.
10. Slot in the chip board. This will create your workbench table top.
11. Your S-Rax Workbench is now complete.
04