Nobels DEL-mini Bedienungsanleitung

DEL -mini
TM
Digital DELAY
Owners Manual
English
Specifications
Power: stabilized and filtered power supply 9 Volts DC (optional)
Power connector: 2.1 mm / negative center
Consumption: max. 58 mA
Input impedance: 1M ohm
Output impedance: 10K Ohm
Max. input level: 2.8 dBu (1 kHz - 1% THD+N)
Dynamic Range: 103 dB
DSP Processing:
48 kHz / 32 bit - A/D D/A Sampling Rate 48 kHz / 24 bit
Controls:
Time, Feedback, Mix, („GitD" pointer knobs)
Switches:
Mode, Bypass, Mono-Stereo Signal, On/Off (Tap Tempo)
Jacks:
DC, Input TRS 1/4" (6.3 mm), Output TRS 1/4" (6.3 mm)
Indicator (LED):
1x Multicolor LED: (On/Off, Mode and Tap Tempo)
Tape Delay Time:
up to 553 ms
Analog Delay Time: up to 402 ms
Digital Delay Time: up to 1000 ms
Mounty-P: 4x fold-out Mounting Plates
Dimensions (cm): L/W/H 9,37 / 4,85 / 5,13 (unpacked) - 12 / 6,95 / 6,5 (packed)
Weight (gr.): 210 (unpacked) / 301 (packed)
Specifications are subject to change without notice!
* This pedal is optimized for stabalised power supply 9 V DC.
** Hum will occur when using unstabilized power supplies!
Power supply specifications: see imprint on bottom of the unit.
Waste Electrical and Electronic Equipment labeling:
In the European Union, do not discard this product as unsorted municipal waste. Contact your local
authorities or send it back to the Nobels distributor.
More information:
www.nobels.com
Welcome to the Nobels family!
The new Nobels DEL -mini . The digital delay pedal combines an outstanding sound selection of legend-
ary echoes, practical and simple switching and application options in a space-saving housing. Plus that
little Nobels extra in the form of fold-out Mounty-P mounting plates or "Glow in the Dark" pointer knobs.
Everything at an extremely attractive price! We hope you enjoy using this pedal!
TIME Control:
This potentiometer controls
the delay time. This varies
depending on the set mode.
OUT Jack:
The output to the
amplifier, effects unit, etc. The
socket can be operated in
mono and also in stereo.
MIX Control:
This control regulates the
mixing ratio and proportion of
the echo signal.
SWITCH:
Switches the device on/off
and also controls the tempo
(time) by 'rhythmic tapping'
The tap tempo mode is
reached by holding the button
(approx. 2 seconds).
* **
Mounty-P:
4x fold-out Mounting Plates.
BF/TB Switch:
Selector switch for
true- or buffered
bypass.
Power supply socket 9 Volts DC
Delay Mode:
Tape - Homage to an old, mechanical tape echo.
Analog - Reproduction of a classic analogue echo pedal.
Digital - Modern version of a digital echo.
Mono / Stereo operation - how should the switch be set?:
Guitar or mono effect signal in > mono out = mono
Guitar or mono effect signal in > stereo out = mono
Stereo signal in > stereo signal out = stereo
In stereo mode, a stereo jack plug or a Y-cable must be used in the input
and output.
Important notes
Avoid using this unit in extreme humidity, heat or dusty environment!
FEEDBACK Control:
Sets the desired number of repeti-
tions of the echo.
MODE Switch:
Here you can switch between a selec-
tion of three different echo types. See
description below.
IN Jack:
For connecting your guitar, another
instrument or an effects unit. The
socket can be operated in mono and
also in stereo.
LED:
The LED indicates the status and
mode of the effect device. LED lights
up = device on. Green = tape / Red
= analogue / Blue = digital. In tap
tempo mode, the speed is indicated
by flashing.
Mono-Stereo Switch:
Selector switch between
mono or stereo operation.