Beta 1838COMPACT Bedienungsanleitung Seite 6

OPERATION MANUAL AND INSTRUCTIONS ISTRUZIONI PER L'USO
TECHNICAL DATA
LIGHT SOURCE
MAIN LIGHT
TOP LIGHT
LIGHT FLUX
Main light
TOP light
OPERATION TIME
Main light
TOP light
BATTERY
CHARGING TIME
CHARGE INPUT
PROTECTION DEGREE
OPERATING TEMPERATURE
USE
Select the operating mode of the lamp as follows, pressing the ON/OFF switch:
– Press once to enable the TOP light;
– Press a second time to enable the MAIN light in the eco mode;
– Press a third time to switch the lamp to the full power mode;
– Pressing a fourth time will cause the lamp to be disabled and switched off.
The lamp has a smart memory function: if it runs in any mode for over 5 seconds, this will be stored. The lamp will switch off
automatically by pressing the on/off button. Pressing the on/off button again will cause the lamp to go back to the stored mode.
The lamp is fitted with a magnet on the swinging support, designed to adhere to ferrous surfaces.
CHARGING MODE
Put the lamp in the OFF mode. To charge the lamp, lift the protective cover of the USB port.
Connect the cable to the lamp from a USB power supply source compatible with the data provided in the TECHNICAL DATA table.
While the lamp is being charged, the green LED light next to the USB port will be blinking.
When the lamp is fully charged, the LED will turn on solid green.
When charge is completed, disconnect the lamp from the power supply and close the protective cover of the USB port.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel only. For such jobs, you can contact Beta Utensili S.P.A.'s
repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be collected separately from
other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
• deliver it to an appropriate collection facility for electronic and electrotechnical equipment;
• return it to the dealer upon purchase of a new, equivalent item of equipment;
• in case of a product for professional use only, contact the manufacturer which will arrange for the product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to the environment
and human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and will give way to the
application of such fines as provided for under current regulations.
6
High-power COB LED light
High-power SMD LED light
Full power ca. 300 lm
ECO ca. 120 lm
Power ca. 150 lm
Full power ca. 3.5h
ECO ca. 6.5h
Power ca. 6h
Li-lon 3.7V
1500 mAh
5.55 Wh
ca. 2.5 h
DC 5V 1A USB type C
IP 65, IK 07
- 10 °C ÷ +40 °C
EN I