Technical Specifications - X-Sense Rc01 Pro Bedienungsanleitung

silenced Pressthe button again to silence the
initiating alarm
The LED on the remote
each time you press the button. indicating it has
received the command
How to Test the Battery Status of the
Remote Controller
In standby mode only (non-alarming mode). if
you quickly press the test/silence button on the
remote controller, the LED indicator
blue, indicating normal operation and a sufficient
battery level.

Technical Specifications

Transmission Frequency
Remote Controller Range 15m (In Open Air)
Operating Temperature
Battery Type
Battery Life
controller will flash blue
Will flash
868 MHz/915 MHz
0-500C
3 V CR2032 Lithium
Battery
1 Year
Troubleshooting
The insulating
film on the
indicator
on the battery has not
been peeled off,
remote
controller
The battery isnot Take out the
does not
installed properly battery and
light up
rization or
when the
positionh
button is
pressed.
The battery
power is low,
Unsuccessful
wireless pairing,
interlinked
alarms
do not
respond
Out of range or
to the
interference
remote
the environment/ another place
controller
other
devices,
Peel off the
insulating film,
reinstall Make
sure the contacts
are good
Replacewith a
new battery,
Pair the remote
controller
and wireless
interlinked alarms
again
Move to a closer
from location or
and try again.