Herunterladen Diese Seite drucken

therm-ic REFRESHER Gebrauchsanweisung Seite 6

Vorschau ausblenden Andere Handbücher für REFRESHER:

Werbung

INSTRUCTIONS FOR USE / ENGLISH
WARNING: There must be no objects in the boot or
glove during use, otherwise the air circulation can be
impeded.
• Plug in the power cable and switch on the unit.
• To save energy, it is recommended to disconnect
the device from the power supply if not used for
a prolonged period of time.
OPERATION
Turning the device on:
Pressing the function key (1.3) once turns on and
puts the Therm-ic Refresher into continuous
operation mode; the operation display (1.1) will be
illuminated.
Turning the device off:
Pressing the function key (1.3) for an extended period
of time (appox. 2 seconds) turns off the Therm-ic
Refresher. The operating display (1.1) will turn off.
Operating timer:
The time can be enabled using the function key (1.3).
Press the function key (1.3) accordingly to set the
timer duration (1 hour, 3 hours or 6 hours). The LED
(1.2) for the selected timer duration will light up.
Press the function key (1.3) repeatedly to change the
timer duration: ON/continuous operation > 1h > 3h>
6h > OFF > ON/continuous operation > 1h, etc.
If none of the three timer LEDs (1.2) is on, the Therm-
ic Refresher is in continuous operation mode.
ENVIRONMENTAL PROTECTION
Your appliance contains many recyclable materials.
This logo indicates that used devices should not be
mixed with other waste. Do not dispose of the device
in the household waste but take it to an electronic
waste collection point. The packaging materials are
recyclable raw materials. Take them to a recycling
center. This will ensure that the equipment is recycled
in the best possible way, in accordance with the
current regulations on electrical and electronic waste.
6

Werbung

loading

Diese Anleitung auch für:

Refresher v2