GGM gastro FKI200 Produktanleitung Seite 2

EN ENGLISH
Product Manual: Bottle Freezer - White Plastic Coating (200 Litres) Model: FKI200
---
1. General Information
Congratulations on your purchase of the FKI200 Bottle Freezer. Designed to efficiently store and freeze beverages, this
model features a durable white plastic coating, ensuring longevity and ease of cleaning. The FKI200 is perfect for bars,
restaurants, and home use.
2. Safety Information
- Electrical Safety: Ensure the freezer is plugged into a properly grounded outlet and avoid using extension cords. Do
not operate the unit in wet conditions.
- Temperature Safety: The internal temperature may drop below freezing. Avoid direct contact with frost or ice.
- Loading Stability: Do not overload the freezer to prevent tipping or mechanical failure.
- Ventilation: Ensure there is adequate ventilation around the unit to prevent overheating. Keep the air vents
unobstructed.
- Children and Pets: Always supervise children and pets when near the appliance. Do not allow children to operate or
play with the freezer.
- Maintenance Safety: Unplug the appliance before performing any cleaning or maintenance.
3. Product Overview and Specifications
- Model: FKI200
- Volume: 200 Litres
- Material: White Plastic Coating
- Dimensions: Height: 85 cm, Width: 80 cm, Depth: 60 cm
- Power Consumption: 300 Watts
- Refrigerant: R134A
- Temperature Range: -18°C to -20°C
4. Setup and Installation
- Location: Place the freezer on a flat, stable surface away from direct sunlight and heat sources.
- Power Supply: Ensure the appliance is near a power outlet. The voltage should match the specifications indicated on
the data plate usually found at the back of the unit.
- Leveling the Unit: Adjust the feet of the freezer to ensure it is level. This is crucial for proper operation and efficiency.
- Initial Setup: Once positioned, plug in the appliance. Allow it to run for at least 24 hours before loading it with products
to ensure it reaches the appropriate freezing temperature.
5. Operation
- Temperature Control: Use the temperature control knob on the front panel to set your desired freezing temperature.
The mid-range setting is recommended for optimal performance.
- Loading Products: Place products in the freezer without blocking air vents. Distribute weight evenly across the
shelves.
- Defrosting: In case of frost buildup, unplug the unit and perform manual defrosting. Allow ice to melt, then wipe down
the interior.
6. Cleaning and Maintenance
- Regular Cleaning: Clean the exterior with a damp cloth and a mild detergent. Avoid abrasive cleaners that can scratch
the surface.
- Interior Cleaning: Empty the freezer before cleaning. Use a solution of warm water and baking soda to remove spills
and odors. Rinse with clean water and dry thoroughly.
- Maintenance Check: Periodically check the power cord for wear, and inspect the door seals for tightness and
cleanliness.