Seite 1
IN230700208V01_GL 839-823V80 ULTÉRIEURE. IT _ LEGGERLO ATTENTAMENTE.
Seite 4
EXPLOSION FIGURE 4x25mm 6x30mm 3x12mm 3.5x12mm L300mm L300mm L300mm L300mm NOTE EN_Do not confuse similar screws.Do not tighten bolts fully until all parts are connected! FR_Ne pas confondre des vis s imilaires.Ne serrez pas les boulons à fond tant que toutes les pièces ne sont pas connectées! ES_No confunda tornillos similares.No apriete los tornillos completamente hasta que todas las partes están conectadas!
Seite 5
EN_Please nd the exact hole for installation, otherwise it will be misaligned.The screws on the drawer slide must be leveled , otherwise it will affect the smoothness of the d rawer. FR_Identi ez le trou exact pour l'installation, sinon il sera mal aligné. Les vis de la glissière du tiroir doivent être nivelées, sinon cela affectera le fonctionnement du tiroir.
Seite 15
EN_Be careful to push in the board when the both sides slide way been aligned. FR_Prenez soin d'enfoncer la planche lorsque les deux côtés de la glissière sont alignés. ES_Empuje con cuidado el tablero después de que los dos lados se hayan alineado. PT_Ter o cuidado de empurrar a placa quando os dois lados estiverem alinhados.
Seite 16
Imported by Aosom Canada lnc. 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9 MADE IN CHINA Importé par Aosom Canada Inc. 7270 Woodbine Avenue, unite 307, Markham, Ontario Canada L3R 4B9 Fabriqué en Chine...