GGM gastro IDHK2022 Produktanleitung Seite 2

Product Manual for Induction Ceiling Hood 2.0m with Filter and LED Lamp (IDHK2022)
1. General Information
Thank you for purchasing the Induction Ceiling Hood 2.0m with Filter and LED Lamp (IDHK2022). This product is
designed for use in commercial kitchens, providing effective air filtration and illumination. Please read this manual
carefully to ensure safe and proper use of the product.
2. Safety Information
- Electrical Safety: Ensure the hood is connected to a power supply compatible with the specified voltage and current
ratings.
- Installation Safety: The installation must be carried out by a qualified professional to avoid hazards.
- Ventilation: Ensure there is adequate ventilation around the hood to prevent overheating.
- Cleaning: Always disconnect from power before cleaning. Use appropriate cleaning materials to prevent damage.
- Children and Pets: Keep the product out of reach of children and pets to avoid accidents.
- Fire Safety: Do not expose the hood to open flames or heat sources.
- Use of Filters: Replace filters as per the maintenance schedule to prevent blockages and ensure efficiency.
3. Product Overview and Specifications
- Model: IDHK2022
- Type: Induction Ceiling Hood
- Dimensions: 2000mm x 600mm x 300mm
- Weight: 45kg
- Power Supply: 230V / 50Hz
- Power Consumption: 300W
- Airflow: 1200m³/h
- Light Type: LED
- Filter Type: Grease filter
- Noise Level: 52dB
- Material: Stainless Steel
4. Setup and Installation
1. Tools Required: Screwdriver, drill, level, measuring tape, and adjustable wrench.
2. Mounting Location: Choose a location that allows a minimum height of 2.3m from the floor.
3. Electrical Connection: Ensure a dedicated power supply is available near the installation site.
4. Mounting the Hood:
- Use the measuring tape to determine the correct height and mark the location on the ceiling.
- Secure mounting brackets to the ceiling using screws and anchors.
- Hang the hood on the brackets and level it.
5. Connect Ducting: Connect the appropriate ducting to the exhaust port of the hood.
6. Electrical Setup: Connect the hood to the power supply, ensuring all connections are secure and insulated.
7. Final Inspection: Check all components for stability and security before operation.
5. Operation
- Turning On/Off: Use the power switch located on the front panel to turn the hood on or off.
- Fan Control: Adjust fan speed using the control panel. Higher speeds provide increased airflow.
- LED Light: Activate the LED light with the dedicated switch for enhanced visibility over the cooking area.
6. Cleaning and Maintenance
- Clean the exterior and control panel with a damp cloth and mild detergent regularly.
- Wash or replace grease filters according to usage; generally every 4-6 weeks.
- Professionally service the internal components annually to ensure optimal performance.
7. Troubleshooting
- Hood Does Not Turn On: Check power supply and ensure all connections are secure.
- Insufficient Airflow: Inspect and clean filters and ensure ducting is not blocked.
- Unusual Noises: Check for loose components or debris in the fan.
8. Disposal
At the end of its life cycle, dispose of the product in accordance with local regulations regarding electronic waste. The
product should not be mixed with general household waste.
9. Contact
For further inquiries or assistance, please reach out to us at:
- Email: info@ggmgastro.com
- Phone: 0800 7000 220
- Address: Weinerpark 16, 48607 Ochtrup, Germany
EN ENGLISH