CME H4MIDI WC Schnellstartanleitung Seite 2

a bus or power bank) and DC 9V power (with positive
polarity on the outside and negative polarity on the inside,
which must be purchased separately).
INSTRUCTIONS:
1. Use a USB cable to connect the H4MIDI WC's USB-A
port to a plug-and-play (USB MIDI class compliant) USB
MIDI device.
2. Connect the MIDI IN port(s) of the H4MIDI WC to the
MIDI OUT or THRU of your MIDI device(s) using a 5-pin
MIDI cable. Then, connect the MIDI OUT port(s) of this
device to the MIDI IN of your MIDI device(s).
3. Utilize a standard USB power supply to connect to the
H4MIDI WC's USB-C port, or use a DC 9V power supply
to connect to the DC jack. The LED indicator will
illuminate, indicating connectivity, enabling MIDI
message exchange between connected USB and MIDI
devices.
For the user manual covering advanced features (such
as how to extend Bluetooth MIDI) and the free HxMIDI
Tools software, please visit CME's official website:
www.cme-pro.com/support/
H4MIDI WC