Technical Specifications - X-Sense Ws01 Bedienungsanleitung

Technical Specifications
Power Supply
Operating Life
Battery Life
Sensor Type
Operating Temperature
Operating Relative Humidity
Alarm Volume
Silence Duration
Waterproof Rating
Replaceable 2 × 1.5 V AAA batteries
5 years
3 years
Sensor probe
32–122°F (0–50°C)
≤ 90% RH (non-condensing)
≥ 105 dB at 10 ft (3 m)
10 seconds
IP66
10
Troubleshooting
Problem Cause
The device does The device is
not work. It is not activated.
not triggered
when there is a
water leak.
The battery is
low.
Solution
Check whether the device is
activated. The device needs to be
activated before it is used for the
first time. Otherwise, the device
will not be triggered (refer to
"Activating the Device" section).
Upon activation, press the test
button to make sure it is
operating properly.
Please check whether the battery
power is sufficient. When the
battery is low, the red LED will
flash once every 60 seconds
paired with one beep. Please
replace the battery immediately.
11