HOMCOM BL3437B Bedienungsanleitung Seite 6

OPERATING INSTRUCTIONS：
Place the motor base on a flat, sturdy surface, it is so important that the surface is clean and
dry fit the jar on motor base, once assembled, plug the power cord into an electrical outlet
Add all necessary ingredients to jar and secure the cover; you may add more ingredients by
removing the measuring cup and dropping ingredients through the fill area, replace the
measuring cup a er adding any ingredient.
Do not put hands in jar with the blender plugged in, start blending
All ac ons are ready, manual mode and pre-se ng program mode are ready for your choice.
The unit will work once you definite any modes.
A er power on, the knob should be at the "OFF" posi on when plug in, and the buzzer
beeps twice. When the machine does not work, it must turn back to OFF.
PRESET FUNCTION
"OFF":
After the blender is powered on.when the knob is in the OFF file,the buzzer will beep 2 times and the
blender will not work
"
:
Cleaning program:
After power on, wait for the blender to start working in this gear for 1.5s.In 2s, soft accelerate to 5 and run 2s and
then pause 2s,This is a loop.repeat 10 cycles after the machine stops running.
"
:
Fruit and vegetable shortcut program
After power on,the blender works in accordance witn the set program at this gear,and stops running after a total of
2min
:
"
Nuts Shortcut program
After power on,wait for 1.5s,the blender start to working,The blender will work in accordance with the set program
for 1min and then stop.
:
"
Milkshake Shortcut program
After power on,wait for 1.5s,the blender start to working,The blender will work in accordance with the set program
for 1min and then stop.
:
"
Ice crush program
After power on,wait for 1.5s,the blender start to working,The blender will work in accordance with the set program
for 1min and then stop.
It is normal for machines to have a slight displacement when they are working.
:
" 1-5"
The blender accelerates gradually from gear 1 to 5
5
EN