Electric Connection - Origial Oriwm10Aw Benutzerhandbuch

SECURITY INSTRUCTIONS
EN
FACILITY
• Remove all packaging material and shipping screws before using the appliance.
Otherwise, serious damage may occur.
• This appliance is equipped with a single inlet valve and can only be connected to the
cold water supply.
• The mains plug must be accessible after installation.
• Before washing clothes for the first time, the product should be operated once through
all procedures without any clothes inside.
• Before using the washing machine, the product must be calibrated.
• Do not place excessively heavy objects on the appliance, such as water containers or
heating appliances.
• The
appliance and the old ones should not be reused.
• Max. Inlet water pressure 1 MPa. Minimum inlet water pressure 0.05 MPa.

ELECTRIC CONNECTION

• Make sure the power cord does not get caught by the machine as it may be damaged.
• Connect the product to a grounded outlet protected by a fuse that meets the values
in the "Technical Specifications" table. Installation of the ground connection must be
carried out by a qualified electrician. Make sure the machine is installed in accordance
with local regulations.
• Electrical and water connections must be made by a qualified technician in accordan-
ce with the manufacturer's instructions and local safety regulations.
• Do not use multiple plugs or extension cords.
• The appliance must not have an external switching device, such as a timer
or connected to a circuit that is turned on and off regularly.
• Do not disconnect the plug from the outlet if there is flammable gas
• nearby.
• Never remove the plug with wet hands.
• Always pull on the plug, not the cord.
• Always unplug the appliance if it is not in use.
|
6
new hose sets
Warning!
supplied with the unit must be used.