Equalizer; Wall Mounting - Sackit Wave Gebrauchsanleitung

USB
1. Plug in SACKit WAVE with the provided power supply.
2. Press and hold the
3. Insert the USB drive with the desired audio files into the USB port on the soundbar.
4. 'USB' mode is automatically activated when the USB drive is inserted into the soundbar. When the USB drive
is connected, 'US' appears in the display.
5. Please only use USB drive with a disk capacity of MAX 32G.

EQUALIZER

Your soundbar offers three equalizer modes: Music, Movie, and Speak, allowing you to customize your sound
experience to your needs. Switch between the modes by pressing the 'EQ' button on the remote control.
• E1 Speak Mode: Perfect for dialogue and speech, enhancing clarity and making voices more distinct.
• E2 Movie Mode: Ideal for movies and TV series, emphasizing dynamics and surround effects.
• E3 Music Mode: Optimized for music playback with balanced sound and deep bass.

WALL MOUNTING

SACKit WAVE can be placed vertically or mounted on the wall. The back of the soundbar is equipped with two
keyhole mounts for wall mounting.
1. Measure the distance between the keyhole mounts and mark two corresponding points on the wall where the
soundbar will be mounted. Use a spirit level to make sure the marks are level.
2. Drill holes at the marked points and choose wall plugs and screws that fit your wall type.
3.
Screw the screws into the wall so that they protrude about 5-7 mm.
4. Hang the soundbar by placing the keyhole hangers over the screws and gently push down until the soundbar is
secure.
-button for 3 seconds on either the soundbar or remote control to turn on the soundbar.
40 CM
13