Description Of Parts - Trevidea G3 Ferrari Razor-Set Bedienungsanleitung

- When changing the cut accessories, switch off the
appliance. Do not use the appliance if an accessory (eg
comb or blade) is damaged.
- The unit must be charged only when it is turned off.
Connect device to compatible power socket.
- Clean and lubricate the machine regularly to ensure
better performance and longer life.
- Never leave the appliance unattended while it is running.
- Operating temperature 15-35 ° C. If the unit is subject to
a major change in temperature, pressure and humidity,
wait about 30 minutes before using it.
- This unit was created for cutting hair, shorten beard,
sideburns and mustache and as a nose/ears trimmer; any
other use is considered dangerous. Do not tick and / or
cut your eyebrows and eyelashes with this unit.
WARNING: never use the unit for any reason
inside the bath or in the shower. Avoid any
splashes of water from getting inside the device. If this
happens, the hair clipper must be checked by qualified
personnel before operating it again.
DESCRIPTION OF PARTS G30062
A) Hair clipper comb (4pcs) B) Hair clipper attachment
E) Nose/ear trimmer
I) Display
O) Precision trimmer
RECHARGING
When you first use the product fully charge it, leaving it connected for at least 1.5 hours.
To recharge, connect the USB cable (H) to a suitable USB socket (PC, USB charger, power bank....) and into
the connector on the rear of product (P).
During charging the LED (I) flashes. When battery is fully charged, it stays on fixed.
The following measures will preserve the battery life.
At first use the product fully charge the product, leaving it connected for at least 1.5 hours. Before you
recharge, completely discharge the battery.
When the unit is not in use for a long period (2 months), it is recommended to let it charge for about 1.5 hours
before using. In any case it is advisable to fully discharge the battery before recharging. If the appliance, even
after a recharge, works only if it is connected to the USB, it is possible that the battery is no longer capable of
delivering enough power to the unit. In this case, please contact an authorized service center.
F) Beard trimmer
L) Housing
P) Power socket
C) Shaver
G) Beard trimmer comb
M) ON/OFF switch
Q) Cleaning brush
D) USB cable
H) Connector
N) Lubricating oil
R) Charging stand
11