Folding And Unfolding; First Steps - Beeper Prime Schnellstartanleitung

CHARGER MAINTENANCE
• The charger works only Withthe dedicated AC adapter.
• The adopter must be plugged into o household outlet and easily accessible.
• Do not cover, expose to Gsource at hect or humidity and use in a ventilated areo.
• Please unplug your charger if it Is not in use.
• Do not use your charger it is damaged
• The external flexible coble Ofthis transformer cannot be reploced. The transformer should be scrapped
• Never connect ond disconnect the battery connection terminals while the power coble ISstill connected to the moins Always remove the plug from the socket first.
• Do not store gour mains charger in low temperature areas. When the device returns to its normal temperature, moisture con form inside the device and damage the product
• Unplug the charger during lightning storms or when unused for long periods Oftime to avoid damage.
DECLARATION OF CONFORMITY
Our products meet the compliance standards in force, find the declaration Ofcompliance in the complete instructions downloadable at the tollowing URLOddress: https://urtz.fr/kcii
TECHNICAL ASSISTANCE 8 WARRANTY
YourEDP hos a 10-gear worrantg (depending on the parts):
• Frame 8 Structure = 10 gears
• Electronics 8 Mechanics = 3 yeors
A one-yeor manufacturer's warranty is applicable for the botteries (see our general conditions of Otter-sales service)
For anu reauest do not hesitGteto contact aur technical team by email at technique@beeper.fr.
ASSEMBLY
Tobegin assembling gour scooter, straighten the mast and lock it using the folding system.
Insert the battery in its slot ond lock it using the set of keys provided.
Insert the telephone support on the left of the display ond secure it with the Allen key 3 mm.
Insert the brakes on the handlebar.
Then screw the handles and tighten the broke rings using the Allen key 5 mm
FOLDING AND UNFOLDING
• Folding ond unfolding con be difficult during the first uses.
• Moke sure your scooter is turned off.
1.Press the button on the scooter's folding hondle.
2. Lower the folding system lever and lower the mast towards the platform.
3. Secure your scooter by engaging the hook located under the phone holder on the
hook of the reor mudguard.
Tounfold your scooter, do the reverse.
Find the complete technical manual on our website at the following address: https://urlz.fr/kcii or bg flashing the QR code opposite
Your electric scooter
opplicotion.
To install ond use it, please download
"MiniRobot" application directly from:
• APPSTORE for APPLE IOS devices
• PLAY STORE for ANDROID devices
or bg scanning the QR code.
Turn on your scooter ond launch the
scooter connects outomatically.
FIRST STEPS
1.Ploce one foot on the platform ond Stort the scooter with your second foot.
2. Once the scooter is lounched, pull the throttle trigger.
3 After picking up speed, put the second foot on the platform.
4 Tochangespeed,press2 shortpresseson the on/off button locatedat the level
of the right handle.
5 Pull the acceleration trigger to accelerate.
6 Apply the brakes to slow down.
7. Once your scooter has stopped, you can get off ond turn it off.
hos a mobile
APPSTORE
the
PLAY STORE
opp, the