Height adjustment
Press the height adjustment button on the auxiliary
driving frame to adjust the handle to the appropriate
height. Repeat on the other side. Ensure that the
buttons on both handrails are locked. Ensure that
both handles are set to the same height
Adjustable height of handle: 79.5-93cm
BRAKE
1. Pull the brake handle upwards to assist with the
driving brake
2.Push down on the brake handle to lock the rear
wheels, and at this time, the auxiliary vehicle is in the
parking state. To release the parking status again,
pull the brake lever upwards to release the rear
wheels
The brake adjustment is as follows:
Turn the adjusting screw counterclockwise to
increase tension, then turn the adjusting lock nut
clockwise while keeping the adjusting screw
stationary. Reducing brake pressure may affect the
brakes in the locked position.
Movable crutch holder
Slide the crutch holder down and fix it at the
designated position on the side of the frame
3