Herunterladen Inhalt Inhalt Diese Seite drucken

Product Installation - Algam Lighting Spectrum500 Rgb Bedienungsanleitung

Multicolor animationslaser 500 mw rgb
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

PRODUCT INSTALLATION

POWER SUPPLY
Please use the attached power, note that power voltage and frequency are the same as the marked voltage and
frequency of device when connecting power. Every device's power should be connected separately, so that de-
vice can be controlled individually.
DMX CONNECTION
Connection between laser lights and DMX must use the shied cable of diameter more than 0.5mm. Please use
the attached 3 pin XL plug/socket to connect the DMX output/input interface. The connection between socket
and cable as below (note the plug/socket's 3 pin number and position).
DMX-OUTPUT
XLR mounting-sockets (rear view)
1 ∙ Shield
2 ∙ Shield (-)
2
1
3 ∙ Shield (+)
3
When using standard DMX512 control signal, the last device's output interface must be connected to a DMX plug.
This plug is putting a 120 ohm resistance between "canon" plug's 2 pin and 3 pin. Showing as below pic. Sticking
this plug into the last device's signal output interface, it will avoid the interference during the process of signal
transmission.
RIGGING
Caution! The installation must be carried out by qualified service personal only. Improper installation can result
in serious injuries and /or damage to property. Overhead rigging required extensive experience! Working load
limits should be respected, Certified installation materials should be used, the installed device should be ins-
pected regularly for safety.
INTERLOCK
An «Interlock» connector cap is included in the box with this device. If you are not using system such as an Emer-
gency RED Button ( optional ... not included in this package) to shut down the LASER beam in case of danger,
you MUST connect this CAP to the INTERLOCK connector (see
LASER beam will be turned off.
Interlock connector
CAP
DMX-INTPUT
XLR mounting-plugs (rear view)
2
1
3
in nextpage). Without this CAP connector, the
9
Emergency Red Button
(Optional, not included
with the product)
P.20
OPERATION INSTRUCTIONS
1
2
3
4
5
6
PIN3
PIN2
7
8
LASER RADIATION - RAYONNEMENT LASER
AVOID DIRECT EYE EXPOSURE
EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
CLASS 3B LASER PRODUCT
APPAREIL A LASER DE CLASSE 3B
EN60825-1 / 2014
WAVELENGTH- LONGUEURS D'ONDES
638nm,520nm,450nm
LASER RADIATION POWER <500mW
PUISSANCE DU RAYONNEMENT LASER <500mW
FUNCTION
1
Microphone
2
Display
3
Keyboard
4
DMX input
5
Size
6
ILDA Interface
7
DMX output
8
Secutrity hook
9
DMX input
10
Power connector
11
INTERLOCK connector
12
Security KEY
13
LED status
14
LASER output
15
Bracket screw
13
12
11
10
9
LASER RADIATION - RAYONNEMENT LASER
AVOID DIRECT EYE EXPOSURE
EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
CLASS 3B LASER PRODUCT
APPAREIL A LASER DE CLASSE 3B
EN60825-1 / 2014
WAVELENGTH- LONGUEURS D'ONDES
638nm,520nm,450nm
LASER RADIATION POWER <500mW
PUISSANCE DU RAYONNEMENT LASER <500mW
DESCRIPTION
Audio detection
Menu/function display
For menu/function selection
Adjust mic sensitivity for optimal effect detection
For laser patern projection size adjustment
ILDA IN & OUT
DMX signal Output - XLR 3 pin
Attach safety cable here
DMX signal input - XLR 3 pin
Mains connector
LASER RADIATION - RAYONNEMENT LASER
For security shutdown of laserbeam EN 60825-1:2014
AVOID DIRECT EYE EXPOSURE
EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
CLASS 3B LASER PRODUCT
APPAREIL A LASER DE CLASSE 3B
For security shutdown of laserbeam EN 60825-1:2014
EN60825-1 / 2014
WAVELENGTH- LONGUEURS D'ONDES
638nm,520nm,450nm
LASER RADIATION POWER <500mW
PUISSANCE DU RAYONNEMENT LASER <500mW
Status LED, light ON when LASER beam is active
LASER bea output
Aujust projector position
P.21
14
EN60825-1 2014 / IEC 1075/14
15
LASER RADIATION - RAYONNEMENT LASER
AVOID DIRECT EYE EXPOSURE
LASER RADIATION - RAYONNEMENT LASER
EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
AVOID DIRECT EYE EXPOSURE
CLASS 3B LASER PRODUCT
EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
APPAREIL A LASER DE CLASSE 3B
CLASS 3B LASER PRODUCT
EN60825-1 / 2014
APPAREIL A LASER DE CLASSE 3B
WAVELENGTH- LONGUEURS D'ONDES
EN60825-1 / 2014
638nm,520nm,450nm
WAVELENGTH- LONGUEURS D'ONDES
LASER RADIATION POWER <500mW
638nm,520nm,450nm
PUISSANCE DU RAYONNEMENT LASER <500mW
LASER RADIATION POWER <500mW
PUISSANCE DU RAYONNEMENT LASER <500mW
LASER RADIATION - RAYONNEMENT LASER
AVOID DIRECT EYE EXPOSURE
EXPOSITION DIRECTE DANGEREUSE POUR LES YEUX
CLASS 3B LASER PRODUCT
APPAREIL A LASER DE CLASSE 3B
EN60825-1 / 2014
WAVELENGTH- LONGUEURS D'ONDES
638nm,520nm,450nm
LASER RADIATION POWER <500mW
PUISSANCE DU RAYONNEMENT LASER <500mW
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

563897

Inhaltsverzeichnis