Linea 2000 Primo PR179BC Gebrauchsanleitung Seite 53

very quickly on the evaporator, and your refrigerator.
• Before connecting your refrigerator to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in your
home. A different voltage could damage the appliance.
• The plug is the only way to disconnect the device from the power supply, make
sure it is always easily accessible. To disconnect power to the device, turn off the
device and then unplug it.
• After installation, leave the fridge for 12 hours before turning it on. This way the
refrigerant can settle.
• Allow the appliance to run empty for 3 hours begore filling.
• You can level the appliance using the adjustable legs. The adjustable legs can be
adjusted by screwing them in or out of the appliance.
• The climate class indicates the minimum and maximum ambient temperature
for the proper operation of an appliance. You can find the climate class on the
type plate on the inside or back of the appliance.
• SN: Subnormal: ambient temperature between 10°C and 32°C
• N: Normal: ambient temperature between 16°C and 32°C
• ST: Subtropical: ambient temperature between 16°C and 38°C
• T: Tropical: ambient temperature between 16°C and 43°C
If you need to hinge your door on the opposite side, it is recommended that you
call your local authorised service agent to make this conversion or ask a technician.
Before you reverse the door, you should ensure the appliance is unplugged and
empty.
1. Remove the protective cap from the hinge. On the other side, remove the cover
plate. Inside the door, remove the rubber cover cap at the top.
2. Remove the 3 screws from the top hinge. Remove the top hinge. You can
then lift the door off the lower hinge. Place the door somewhere it is safe
from becoming scratched. When you change the door-opening direction, we
Lift Lower
DOOR CONVERSION
53
WWW.PRIMO-ELEKTRO.BE