APW Mesa ANC Bedienungsanleitung Seite 10

INSTRUCTIONS
Select the APW Mesa ANC headset model from the list displayed to start automatic pairing.
When Bluetooth is activated on the original device, the headphones will reconnect. However,
Bluetooth on the currently connected device must be turned off first.
Factory reset
A factory reset will return the headphone settings to their default state and all your device
pairings will be erased. This may help with problems pairing your headphones.
Switch on the headphones using the MFB button. Press and hold the volume +/- buttons simul-
taneously for approximately 10 seconds, or until the red LED flashes three times. This indicates
that the factory reset was successful.
To pair the headset with your device, follow the instructions in "Pairing".
Controls
Turning On
Turning Off
Answer / end call
Reject call
Skip to previous track
Skip to next track
Volume up
Volume down
Voice assistant activation
Play/Pause
10 ENGLISH
Press MFB for 2 seconds.
Press MFB for 4 seconds.
Short-press MFB.
Press MFB for 1.5 seconds.
Press the – button for 2 seconds.
Press the + button for 2 seconds.
Short-press "+".
Short-press "–".
Press MFB three times.
Short-press MFB.