Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fine Adjustment / Setup / Care Instructions
03
Following set up of the lumianire, if the lamp head is not level,
the horizontal position of the lamp head can be finely ad-
justed by turning the levelling screw of the lamp head.
Rotating the levelling screw in the direction of the ar-
row DOWN lowers the lamp head, rotating it in the
direction of arrow UP, raises the lamp head.
To protect the lamp head from possible conta-
mination during construction or cleaning of the
building, we recommend that after assembling
the lamp head, pulling the cloth cover over the
lamp head and closing it. The lamp can still be
operated despite the cloth cover.
Plug the power plug into the wall outlet (220V-
240V; 50-60Hz). Please note that due to its
special design, if damaged, the power supply cable
should only be replaced by the company Tobias
Grau.
Care Instructions
04
Please clean the luminaire with a dry cloth such as a microfiber cloth for sensitive surfaces. Please do not use
chemical additives. The cleaning should take place after the luminaire has cooled down. If the lamp head is
dirty (dust, flies), it can be cleaned with a soft brush vacuum cleaner.
All manuals and user guides at all-guides.com
The power plug is used as a circuit breaker and the plug socket
must be easily accessible.
10
Werbung
