Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Switching the Appliance On / Off
• Switch the appliance on with the
for activating the control panels (
• Press and hold the
button to switch the appliance off.
• After the time has elapsed, the appliance automatically
switches to standby mode. The fan continues to run to
cool down the appliance.
Selecting Single or Combination Operation
After you have switched on the appliance, the buttons for
activating the control panels appear.
• If you want to use the left fryer, activate it with the
button. The control panel for the left-hand fryer
1 1
appears.
• If you want to use the right-hand fryer, activate it with
the
button. The control panel for the right-hand fryer
2 2
appears.
• To operate both fryers at the same time, press both the
button and the
button.
1 1
2 2
Setting the Temperature ( ) and Cooking Time ( )
The buttons
and
are located once on each side of the
appliance's control panel.
• With the button
, you can switch between entering the
temperature and the cooking time.
• Set the temperature (80 °C – 200 °C) with the buttons
and
.
• Set the cooking time (1 – 60 minutes) with the but-
tons
and
.
• The display automatically switches between the temper-
ature and the cooking time.
Start / interrupt cooking process
• Start the cooking process with the
• Press the
button again to interrupt the cooking
process.
Synchronised switch-off ( )
The
button allows you to prepare two different foods with
different cooking times at the same time. It appears when
both control panels are activated.
• After pressing the
button, set the desired automatic
programme, temperature and cooking time on both
sides.
• Start the programme with the
• The control panel with the shorter cooking time displays
. This programme does not start until the longer
cooking time has reached the shorter cooking time. So
that both cooking processes are completed at the same
time.
12
PC-FR1295H_IM
Automatic Programmes
button. The buttons
Select the desired automatic programme. To do this, press
/
) appear.
the
1 1
2 2
• The following table shows the factory preset tempera-
• Also observe the information on the food packaging.
1. Pull the deep-frying containers out of the appliance by
2. If necessary, place the sieve inserts with the silicone
3. Push the deep-frying containers back into the appliance.
4. Plug the appliance into a properly installed earthed
button.
5. Press the
6. Select one fryer for single operation or both fryers for
7. We recommend preheating the appliance for approx.
8. Press the
9. At the end of the preheating phase, 5 signals sound and
10. Pull the deep-frying containers out of the appliance by
button.
11. Fill the deep-frying containers with the desired food.
12. Push the deep-frying containers back into the appliance.
13. Switch the appliance on again with the
14. Activate the control panel of the deep-fryer, which con-
15. Select an automatic programme or set the cooking time
button. The automatic programme symbol flashes.
tures in degrees Celsius ( ) and the minutes ( ). The
pre-settings are only guide values. Depending on the
size and weight of the food, the temperature and time
may have to be adjusted individually.
Programme
(French fries)
(Cake)
(Steak)
(Chicken)
(Chicken wings)
(Shrimps)
(Sausage)
(Pancakes)
Operation
the handles.
knobs in the deep-frying containers. Push the sieve
inserts all the way down.
They must lock into place.
socket. A beep sounds and all the symbols light up
briefly. The
button lights up.
button to switch on the appliance.
combination operation.
4 minutes. To do this, set the required temperature and
cooking time to 4 minutes.
button to start the preheating phase.
the appliance displays
.
the handle. Place them on a heat-resistant surface.
tains the deep-frying container with the food.
and temperature manually.
°C
min
200
23
160
45
190
10
200
30
190
20
180
15
160
15
180
20
button.
04.06.24
Werbung
