UGREEN NASync DXP480T Plus Benutzerhandbuch Seite 6

Installing M.2 Drives
1, Power off the NAS device, then turn it over, Loosen the screws, remove the bottom panel
O
0 0000 ooo oooonoooooooom
o
o
2 Unscrew the M.2 fixing screws. Insert M2 SSD into the slot in the direction as shown in the image,
then tighten the screws.
a
3. Peel off the film of the silicone pad and stick it on the front-facing
the protective film on the other side
b
surface of the SSD, then peel off