Before First Use
• There is a protective layer on the heating element. To
remove this, operate the appliance for approx. 15 min-
utes without contents. Slight smoke and odours are
normal during this process. Ensure that there is sufficient
ventilation.
•
WARNING:
Let the appliance cool down before cleaning it!
- Unplug the appliance from the mains.
- Wipe out the deep-frying container, the sieve insert
and the interior of the appliance before use.
Notes on Use
• This appliance is intended for the preparation of solid
food. Do not prepare soups or other liquid foods in it.
• A safety switch prevents the appliance from being used
without a deep-frying container.
• To achieve optimum results, fill the deep-frying container
to a maximum of 1 cm below the rim. Never overfill the
deep-frying container so that the food does not come into
contact with the heating element.
• Never add oil or any other liquid to the deep-frying con-
tainer. To achieve a crispy result, the food can be spread
with a little oil.
• All foods that are also suitable for the oven can be pre-
pared in the appliance.
• The sieve insert ensures that the accumulated fat settles
to the bottom of the deep-frying container. This makes
the food crispier.
• When baking cakes, bread, etc., note that the dough
expands. The dough must not come into contact with the
heating element.
• The sieve insert can be removed for baking bread or
similar.
• Food that lies on top of each other during cooking should
be shaken halfway through the cooking time. This opti-
mises the cooking result and prevents uneven cooking.
• Soak homemade potato products for at least 30 minutes
after cutting to reduce potato starch. Then dry the potato
pieces well with kitchen paper.
• The cooking time depends on various factors: Size,
texture, amount of food and set temperature.
• If you do not preheat the hot air fryer, add 5 minutes to
the cooking time.
• Fry steaks and larger quantities of meat in a pan before
cooking in the hot air fryer. Time and temperature de-
pend on the desired cooking level.
• You can also reheat food with the appliance. To do this,
set the timer to 10 minutes and the temperature control
to 150 °C.
FR6076HCB_IM
Operation
1. Make sure that the appliance is disconnected from the
mains.
2. Pull the deep-frying container out of the appliance by
the handle.
3. If necessary, place the sieve insert with the silicone
knobs in the appliance. Push the sieve insert all the way
down.
4. Push the deep-frying container back into the appliance.
It must audibly click into place.
5. Connect the appliance to a properly installed safety
socket.
6. We recommend preheating the appliance for about
5 minutes without cooking food. Set the required tem-
perature and cooking time to 5 minutes.
7. When the preheating phase is complete, pull the
deep-frying container out of the appliance by the handle.
8. Place the deep-frying container on a heat-resistant
surface.
9. Fill the deep-frying container with the desired food.
10. Push the deep-frying container back into the appliance.
It must audibly click into place.
11. Switch the appliance on with the timer. Select a cooking
time.
12. Set the desired temperature with the temperature control
knob.
13. If necessary, shake the food halfway through the cook-
ing time. To do this, pull out the deep-frying container by
the handle. Then push the deep-frying container back
into the appliance.
Ending Operation
1. A signal sounds when the set time has elapsed. You can
also end operation prematurely by setting the timer to 0.
2. Pull out the deep-frying container by the handle.
3. Place the food in a heat-resistant bowl.
4. Push the deep-frying container back into the appliance.
9
03.06.24