INSTALLATION
These instructions provide important information for the safe use and maintenance Of all Bodypoint
PivotFitTM Shoulder Harnesses. Give these instructions to the user or their caregiver and review them
to ensure that they are understood.
AWARNING!
Product should be installed and
fitted by a qualified rehab technician.
For installation, this product should be mounted
Flat-mount end-fittings
Cinch-mount end-fittings
Cam buckle (l" suitable for users up to 75kg, 1-1/2"
and 2" suitable for all users)
Optional Bodypoint belt mounting hardware may
be used for mounting to wheelchairs and seating
systems.
AWARNING! Because o ftheriskofchoking, i t is
dangerous to usethis product without stabilizing
the pelvis — always use with a properly fitted pelvic
support belt.
USE:
A WARNING! T hisproduct s hould onlybeused
for positioning a person in a wheelchair
or work chair. It is NOT intended
transportation safety device, as a personal restraint
device, or in any other application where its failure
could result in injury. Misuse
Of this product is unauthorized and unsafe.
AWARNING!
Accidental release of this shoulder
harness
can
allow
the
user to fall forward.
user'smovements or cognitive abilities could lead
to accidental release, a caregiver must be present at
all times during
its use. Ensurethat all caregivers know how to
unfasten the product. Failureto do so may delay
release in an emergency.
nt'
@Bodypoi
558 First Ave. S., Suite 300 1 Seattle, WA 98104 1 206.405.4555 1 800.547.5716 1 www.bodypoint.com
Rear-Pull
Shoulder
AND
ART
NOS.
for use as a
If the
PivotFitTM
Harness
USER'S
INSTRUCTIONS
SH260
& SH280
WARNING! As with any new seating support,
this product may change the way a person sits.
Usersmust continue to practice regular pressure
relief activities and skin integrity checks, not only
where this product contacts the user, but also in
primary pressure-bearing areassuch asthe sacrum,
legs, and buttocks. If increased skin redness or
irritation occurs, discontinue use and consult your
physician or seating specialist. Failureto do so may
result in serious injury, such as pressure ulcers.
MAINTENANCE: Check periodically for signs
of wear in the stitching, webbing, and pads. If
significant wear isfound, contact your supplier for
qualified repair or replacement by Bodypoint. Un-
der no circumstance should this product be altered
or repaired by unqualified persons —health and
safety depend on it!
CLEANING:
hot, 600C(1400F). DOnot bleach. Tumble dry, low
temperature, or drip dry. Do not iron. (Placing
the product inside a cloth bag during washing
helps prevent scratches to the product and the
machine.)
WARRANTY: This product carries a limited-life-
time warranty against defects in workmanship and
materials arising under normal use by the original
consumer. Contact your supplier or Bodypoint for
warranty claims.
For more information on Bodypoint products, and
a list of distributors outside the USA, go to www.
bodypoint.com
Machine wash,
BP1096-en
2018.9