Installation/Registering The Repeater To The; Main Monitor - Panasonic VL-FKD2EX Erste Schritte

Installation/Registering the repeater to the main monitor
1
Repeater: Connect the AC adaptor, and plug the AC adaptor into a power outlet.
R Use only the supplied Panasonic AC adaptor (® page 3).
R When the repeater is turned on, the
A PROGRAM
*1 Press plug firmly.
2
Main monitor: Perform the registration operations for the repeater. (® Operating Instructions of the
Video Intercom System)
R The next step must be completed within 120 seconds.
3
Repeater: Press PROGRAM (A) for about 3 seconds.
R If the indicators do not light green, re-position the repeater in a place where the indicators light
green.
Note:
R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during
use.)
R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to
become disconnected.
8
indicator lights in orange.
A
*1
B Hook
B
C 220-240 V AC, 50/60 Hz
C