For Your Safety - Panasonic VL-FKD2EX Erste Schritte

For your safety

To prevent severe injury and loss of life/property,
read this section carefully before using the product
to ensure proper and safe operation of your
product.
WARNING
Preventing fire and electric shock
R Use only the power source marked on the
product. If you are not sure of the type of power
supplied to your home, consult your dealer or
local power company.
R Use only the specified AC adaptor.
R Do not attempt to disassemble or modify this
product. Contact an authorised service centre
for repairs.
R Never touch the AC adaptor with wet hands.
R Do not touch the AC adaptor during an electrical
storm.
R Do not perform any actions (such as fabricating,
twisting, stretching, bundling, forcibly bending,
damaging, altering, exposing to heat sources, or
placing heavy objects on the AC adaptor) that
may damage the AC adaptor. Using the product
with a damaged AC adaptor may cause electric
shock, short circuits, or fire. Contact an
authorised service centre for repairs.
R Do not overload the power outlet above the
specified levels. Overloading by having many
connections on one power outlet may cause
heat generation, resulting in a fire.
R Never put metal objects inside the product.
Never spill any liquid on the product.
If metal objects enter the product or the product
becomes wet, unplug the product from the
power outlet and contact an authorised service
centre.
R Do not use a microwave oven or other devices,
such as electromagnetic cookers to speed up
the drying process of any parts of the product.
R Completely insert the AC adaptor into the power
outlet. Failure to do so may cause electric shock
and/or excessive heat resulting in a fire. Do not
use damaged AC adaptors or power outlets.
R Regularly remove any dust, etc., from the AC
adaptor by unplugging it from the power outlet,
then wiping it with a dry cloth. Accumulated dust
may cause an insulation defect from moisture,
etc., resulting in a fire.
4
R Unplug the product from the power outlet if the
product emits smoke, an abnormal smell or
makes unusual noise, or if the product has been
dropped or physically damaged. These
conditions can cause fire or electric shock.
Confirm that smoke has stopped emitting and
contact an authorised service centre.
R Hold the main body (not the metal parts) of the
AC adaptor when unplugging it. Unplugging the
AC adaptor while holding its cord or the cord's
plugs may result in fire, electric shock, or injury.
Preventing accidents
R Do not use the product in health care facilities if
any regulations posted in the area instruct you
not to do so. Hospitals or health care facilities
may be using equipment that could be sensitive
to external RF (radio frequency) energy.
R Do not install or use this product near
automatically controlled devices such as
automatic doors and fire alarms. Radio waves
emitted from this product may cause such
devices to malfunction, resulting in an accident.
R Consult the manufacturer of any personal
medical devices, such as pacemakers or
hearing aids, to determine if they are adequately
shielded from external RF (radio frequency)
energy. (The product operates in the frequency
range of 1.88 GHz to 1.90 GHz, and the RF
transmission power is 250 mW (max.).)
CAUTION
Preventing fire and electric shock
R Do not use the product in areas that are
exposed to rain, moisture, steam, or oily smoke,
or areas that have excessive dust.
Preventing accidents, injuries, and property
damage
R Do not use the product in unstable areas or
areas prone to strong vibrations.
When mounting the product to a wall, install the
product securely adhering to the instructions in
this manual to prevent it from falling off the wall.
Avoid installing onto low-strength walls, such as
gypsum board, ALC (autoclaved lightweight
concrete), concrete block, or veneer (less than
18 mm thick) walls. These may cause the
product to fall, resulting in damage to the
product or injury.